This robust 0.375" thick 304 stainless steel sheet offers superior resistance to corrosion and wear, making it an ideal substrate for high-performance abrading and polishing operations. Its precise dimensions ensure consistent results.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.375" |
| Length | 43" |
| Width | 28" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.375-inch thickness, providing exceptional rigidity and durability for demanding industrial processes. The material composition of 304 stainless steel ensures excellent corrosion resistance, particularly against a wide range of chemicals and atmospheric conditions, which is crucial for maintaining the integrity of abrasive surfaces and polished finishes. With dimensions of 43 inches in length and 28 inches in width, this sheet is well-suited for fabricating custom grinding wheels, polishing pads, and other surface treatment tools where precision and longevity are paramount. Its formability allows for custom shaping to meet specific application requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or contaminants. 2. Carefully position the 304 stainless steel sheet according to the design specifications. 3. Secure the sheet using appropriate fastening methods such as welding, bolting, or adhesive bonding, ensuring a stable and load-bearing connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of stainless steel for corrosive environments. | Always verify the specific environmental conditions and select 304 stainless steel or a higher-grade alloy if greater corrosion resistance is required. |
| Inadequate surface preparation before bonding or welding. | Ensure all surfaces are meticulously cleaned and degreased to achieve optimal adhesion or weld integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom abrasive wheel fabrication, Polishing fixture construction, Surface treatment tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||