This heavy-duty 304 stainless steel stock sheet provides superior durability and corrosion resistance for critical safety installations. Engineered for demanding industrial environments, it ensures long-term performance and reliability.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.311" |
| Length | 29" |
| Width | 30" |
Built to exacting engineering tolerances, this 0.311-inch thick sheet measures 29 inches in length and 30 inches in width. Composed of 304 stainless steel, it offers excellent resistance to corrosion and a wide range of chemicals, making it ideal for environments where hygiene and sanitation are paramount. Its robust nature ensures structural integrity under significant stress, suitable for fabricating protective barriers, machine guards, and chemical processing components where safety and longevity are non-negotiable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and capable of supporting the sheet's weight and intended load. 2. Accurately mark the desired cut lines and drilling points on the sheet using appropriate marking tools. 3. Securely fasten the sheet to the mounting surface using industrial-grade fasteners, ensuring all edges are properly supported and any cut edges are de-burred.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the sheet's thickness and application. | Select fasteners with adequate shear and tensile strength, considering the sheet's substantial 0.311" thickness and the forces it will withstand. |
| Failure to de-burr cut edges, creating a safety hazard. | Thoroughly de-burr all cut and drilled edges to prevent sharp protrusions that could cause injury during installation or use. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Machine Guarding, Chemical Processing Equipment, Corrosion-Resistant Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||