This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its robust construction makes it ideal for demanding safety applications where longevity and reliability are paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.285" |
| Length | 43" |
| Width | 28" |
Engineered for reliability and performance, this 0.285" thick stock sheet is fabricated from premium 304 stainless steel, renowned for its superior tensile strength and resistance to a broad spectrum of corrosive environments. The dimensions of 43" in length and 28" in width provide substantial surface area for fabrication into various safety components. This material's non-magnetic properties and excellent weldability further enhance its utility in critical safety infrastructure, ensuring consistent performance under challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and structurally sound. 2. Accurately measure and mark the desired cut lines on the 304 stainless steel sheet. 3. Utilize appropriate cutting tools (e.g., abrasive saw, plasma cutter) to achieve precise dimensions, ensuring safety precautions are followed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that will corrode. | Always use stainless steel fasteners (304 or higher grade) to maintain the integrity of the installation and prevent galvanic corrosion. |
| Improper edge finishing leading to sharp hazards. | Deburr and smooth all cut edges thoroughly to eliminate any sharp points or burrs, ensuring a safe-to-handle finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine guarding panels, Safety barriers and partitions, Protective enclosures for hazardous equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||