This 304 stainless steel stock sheet is engineered for robust performance. Its exceptional strength and corrosion resistance make it the premier choice for demanding industrial, marine, and architectural environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.282" |
| Length | 26" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet measures precisely 0.282 inches in thickness, 26 inches in length, and 28 inches in width. The material composition, conforming to ASTM A240 standards, provides excellent tensile strength and a high degree of resistance to general corrosion and oxidation, particularly in chloride-containing environments. This makes it an ideal substrate for fabrication in sectors ranging from chemical processing and food handling to marine hardware and architectural cladding where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and forming equipment is calibrated for the specified material thickness and type. 2. Clean the sheet surface thoroughly to remove any oils, debris, or contaminants that could interfere with subsequent processing or welding. 3. Securely position the sheet for cutting, bending, or welding operations, utilizing appropriate jigs and fixtures to maintain dimensional accuracy and prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tooling without proper surface protection. | Employ stainless steel tooling or apply protective coatings to prevent cross-contamination and surface scarring. |
| Inadequate pre-cleaning before welding or forming. | Thoroughly degrease and clean the weld joint area and surrounding surfaces with appropriate stainless steel cleaners to ensure optimal weld integrity and finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Fabrication, Marine Hardware and Components, Architectural Cladding and Trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||