This robust 304 stainless steel stock sheet is precisely engineered for lubricating applications requiring exceptional durability. Its 0.254" thickness and generous dimensions provide a reliable surface for demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.254" |
| Length | 40" |
| Width | 39" |
Engineered for reliability and performance, this 304 stainless steel stock sheet exhibits superior corrosion resistance, ideal for environments where lubricants are present. The material's inherent strength and non-reactive properties prevent contamination and ensure longevity in applications such as wear strips, chute liners, and guide rails. With precise dimensions of 0.254" thickness, 40" length, and 39" width, it meets stringent industrial standards for fabrication and integration into complex machinery and systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish meet application requirements. 2. Clean the sheet thoroughly to remove any manufacturing residues. 3. Fabricate and install according to the specific design specifications for the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel that may corrode in the presence of lubricants. | Always specify 304 stainless steel or higher for optimal corrosion resistance and material integrity in lubricating applications. |
| Not ensuring proper surface preparation and alignment during installation, leading to premature wear. | Thoroughly clean and precisely align the sheet to minimize friction and maximize the lifespan of both the sheet and the lubricating components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear Strips and Guides, Chute and Hopper Liners, Bearing Support Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||