This industrial-grade 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.244" thickness, 38" length, and 43" width, it's ideal for custom fabrication in material handling environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.244" |
| Length | 38" |
| Width | 43" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet delivers superior performance in corrosive and demanding environments. Measuring 0.244" in thickness, 38" in length, and 43" in width, its Type 304 composition provides excellent resistance to oxidation and many chemical agents. This material's inherent strength and formability make it suitable for fabricating custom trays, chutes, guards, and structural components within material handling systems, ensuring longevity and operational reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Prepare cutting and forming equipment according to standard operating procedures for 0.244" thick stainless steel. 3. Fabricate components and install securely, ensuring proper support and alignment within the material handling system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify and use 304 stainless steel or equivalent for applications exposed to moisture, chemicals, or harsh industrial conditions to prevent premature rust and degradation. |
| Inadequate edge preparation before welding. | Ensure all edges are properly cleaned and beveled according to welding procedure specifications for 0.244" thick stainless steel to achieve full penetration and strong joints. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of conveyor components, Durable chutes and hoppers for bulk material handling, Protective guards and enclosures for machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||