This 304 Stainless Steel Stock Sheet offers exceptional corrosion resistance and durability, meeting stringent industry standards. Its robust composition makes it ideal for demanding electrical and lighting applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.210" |
| Length | 47" |
| Width | 48" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers superior performance in corrosive environments. With a precise thickness of 0.210 inches, and dimensions of 47 inches in length and 48 inches in width, it meets ASTM A240 specifications. The inherent properties of 304 stainless steel, including its excellent weldability and formability, ensure seamless integration into complex electrical enclosures, lighting fixture housings, and other critical infrastructure components. Its non-magnetic nature further enhances its suitability for sensitive electrical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., laser, waterjet, or shear) to achieve precise dimensions, maintaining edge quality. 4. Proceed with subsequent fabrication steps such as bending, welding, or fastening as per project requirements, ensuring proper joint preparation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive electrical environments. | Always specify 304 stainless steel for its inherent corrosion resistance, preventing premature failure and ensuring longevity of electrical components. |
| Inadequate edge preparation before welding. | Thoroughly clean and bevel edges to the specified angle to ensure full penetration and the integrity of welded joints, preventing stress concentration. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures & Cabinets, Lighting Fixture Housings, Control Panel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||