This 0.201-inch thick 304 stainless steel sheet offers superior corrosion resistance and strength, ideal for demanding safety installations. Its durable nature ensures long-term performance in various industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.201" |
| Length | 35" |
| Width | 28" |
Specified by design engineers worldwide, this 304 stainless steel sheet conforms to stringent industrial safety standards. With a precise thickness of 0.201 inches, a length of 35 inches, and a width of 28 inches, it offers a robust and reliable material for fabrication. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive environments and its high tensile strength, make it the material of choice for critical safety components, guarding, and structural elements where longevity and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Accurately measure and cut the sheet to the required dimensions. 3. Securely fasten the sheet using appropriate industrial-grade fasteners and welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that may corrode the stainless steel. | Always use fasteners made of 304 or 316 stainless steel to maintain material integrity. |
| Inadequate edge preparation leading to stress concentrations. | Properly deburr and smooth all cut edges to prevent premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine guarding and enclosures, Industrial safety barriers, Corrosion-resistant structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||