Engineered for demanding abrading and polishing tasks, this 304 stainless steel stock sheet offers superior durability and corrosion resistance. Its precise dimensions ensure consistent performance in critical industrial processes.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 32" |
| Width | 45" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.163 inches in thickness, with a nominal length of 32 inches and a width of 45 inches. Composed of an austenitic chromium-nickel alloy, it exhibits excellent corrosion resistance, formability, and weldability, making it suitable for environments exposed to chemicals and moisture. The material's inherent strength and surface integrity are ideal for abrasive media applications and high-finish polishing operations, ensuring longevity and predictable results in manufacturing and fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare the substrate or mounting surface, ensuring it is clean, dry, and free from contaminants. 3. Securely fasten the sheet using appropriate mechanical fasteners or bonding agents, adhering to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always specify 304 stainless steel for applications involving moisture or chemical exposure to prevent premature corrosion and degradation. |
| Improper handling leading to surface scratches. | Handle sheets with care using clean gloves and avoid dragging them across rough surfaces to maintain the integrity of the polished finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Surface preparation for coatings and finishes, Abrasive media backing plates, Precision polishing jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||