Engineered for robust performance, this 304 stainless steel stock sheet offers superior corrosion resistance and strength. Its precise dimensions make it ideal for custom fabrication in safety-critical environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.153" |
| Length | 38" |
| Width | 32" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures a nominal thickness of 0.153 inches (3.89 mm), with a length of 38 inches (965.2 mm) and a width of 32 inches (812.8 mm). Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to a wide range of corrosive media and atmospheric conditions. Its inherent durability and non-magnetic properties at room temperature make it suitable for environments where hygiene and chemical inertness are paramount, such as food processing, chemical plants, and public safety installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material grade against project requirements. 2. Prepare substrate and cutting tools for precise fabrication. 3. Secure sheet for cutting, bending, or welding operations according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Employ carbide-tipped blades or waterjet cutting for clean, precise edges without compromising material integrity. |
| Improper post-fabrication cleaning leading to surface contamination. | Thoroughly clean all surfaces with a non-abrasive, industry-approved solvent to remove any residual oils, lubricants, or particulates. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine guards and protective barriers, Corrosion-resistant paneling in industrial settings, Custom fabrication for safety enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||