This 304 stainless steel stock sheet provides exceptional strength and corrosion resistance, ideal for demanding suspending and bracing applications. Its robust construction ensures long-term performance in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.140" |
| Length | 31" |
| Width | 25" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.140 inches in thickness, 31 inches in length, and 25 inches in width. Composed of 18% chromium and 8% nickel, it exhibits superior corrosion resistance, weldability, and formability. The material's high tensile strength and durability make it a prime choice for structural bracing, support systems, and other load-bearing components in corrosive or high-humidity environments, ensuring structural integrity and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely mark and pre-drill pilot holes according to the bracing design. 3. Secure the stainless steel sheet using appropriate corrosion-resistant fasteners (e.g., stainless steel bolts, rivets) ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Always use 304 or 316 grade stainless steel fasteners when fastening 304 stainless steel to prevent corrosion. |
| Over-tightening fasteners, which can deform the sheet and compromise structural integrity. | Apply appropriate torque to fasteners, ensuring a secure hold without deforming the material. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing in marine environments, Support systems for industrial equipment, Custom fabrication for corrosion-resistant enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||