Engineered for robust performance, this 304 stainless steel stock sheet offers superior corrosion resistance and formability. Its precise dimensions make it an ideal raw material for demanding industrial fabrication.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.139" |
| Length | 39" |
| Width | 27" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet is manufactured to exacting standards. With a nominal thickness of 0.139 inches, a length of 39 inches, and a width of 27 inches, it provides substantial material for complex projects. The inherent properties of 304 stainless steel, including excellent resistance to a wide range of corrosive environments and moderate strength, make it suitable for fabricating components in chemical processing, marine environments, food and beverage industries, and general structural applications where durability and hygiene are paramount. Its workability allows for cutting, welding, and forming with standard industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the cutting area with appropriate safety measures and tooling. 2. Accurately mark dimensions for cuts or bends using a scribe or marker. 3. Fabricate the sheet according to design specifications using industrial cutting, bending, and welding equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Employ abrasive cutting discs or waterjet cutting for clean, precise edges without excessive heat or stress concentration. |
| Insufficient pre-cleaning before welding, causing contamination. | Thoroughly degrease and remove any surface contaminants from weld joint areas using stainless steel brushes and appropriate solvents. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Fabrication, Food Processing Equipment, Architectural Cladding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||