This 304 stainless steel stock sheet offers superior corrosion resistance and durability, making it an ideal material for demanding electrical and lighting applications requiring robust enclosures and components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.120" |
| Length | 46" |
| Width | 43" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet adheres to stringent material standards for critical electrical and lighting infrastructure. With a nominal thickness of 0.120 inches, a length of 46 inches, and a width of 43 inches, its Type 304 composition (18% chromium, 8% nickel) provides excellent resistance to oxidation and a wide range of corrosive environments commonly encountered in industrial and commercial settings. This alloy's inherent strength and non-magnetic properties are crucial for housing sensitive electronic components and ensuring the longevity of lighting fixtures exposed to various atmospheric conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for stainless steel to achieve precise dimensions. 3. Securely fasten the fabricated components using compatible stainless steel fasteners to maintain structural integrity and corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools which can cause galvanic corrosion. | Always use dedicated stainless steel cutting and forming tools to prevent contamination and maintain the integrity of the 304 stainless steel. |
| Inadequate cleaning after fabrication, leaving behind debris that can initiate corrosion. | Thoroughly clean the fabricated parts with a mild detergent and water, followed by a thorough rinse and drying, especially before installation in corrosive environments. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures and Junction Boxes, Lighting Fixture Housings and Mounts, Control Panel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||