Engineered for demanding safety environments, this 304 stainless steel sheet provides exceptional durability and corrosion resistance. Its robust construction ensures reliability in high-traffic or critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 28" |
| Width | 45" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.118 inches (3mm) in thickness, with a nominal length of 28 inches and a width of 45 inches. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and a wide range of corrosive agents, making it suitable for food processing, chemical handling, and industrial safety barriers where hygiene and material integrity are paramount. The cold-rolled finish ensures a smooth, easily cleanable surface.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and structurally sound. 2. Precisely mark and drill pilot holes for fasteners according to design specifications. 3. Secure the sheet using appropriate corrosion-resistant fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Always use stainless steel fasteners of equivalent or higher grade to prevent galvanic corrosion. |
| Over-tightening fasteners, causing deformation or damage to the sheet. | Apply torque incrementally and evenly, avoiding excessive force to maintain the sheet's flatness. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Safety Barriers, Food and Beverage Processing Equipment Components, Chemical Storage Tank Linings, Medical Device Housings, Corrosion-Resistant Countertops.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||