This 304 stainless steel stock sheet provides a stable and accurate surface for critical measuring and inspecting tasks. Its robust construction ensures longevity and resistance to environmental factors in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.094" |
| Length | 32" |
| Width | 46" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet offers exceptional durability and dimensional stability. Measuring 0.094 inches thick, 32 inches in width, and 46 inches in length, it's fabricated from high-grade 304 stainless steel, renowned for its excellent corrosion resistance and non-magnetic properties. This makes it ideal for precise layout, calibration, and as a foundational element in metrology setups where accuracy is paramount and environmental exposure is common.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Carefully position the 304 stainless steel sheet onto the prepared surface. 3. Secure the sheet using appropriate fasteners, ensuring even pressure to prevent warping. For critical applications, consider using precision mounting hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Mounting on an uneven surface, leading to inaccuracies. | Always verify the mounting surface is perfectly level and stable using a precision level. |
| Over-tightening fasteners, causing sheet deformation. | Apply fasteners incrementally and evenly, checking for any signs of warping before fully tightening. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision Layout and Marking, Metrology and Calibration Standards, Inspection Fixture Bases, Work Surfaces for Sensitive Measurements, Laboratory Benches.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||