Engineered for robust abrading and polishing tasks, this 304 stainless steel sheet provides exceptional durability and corrosion resistance in harsh industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.077" |
| Length | 46" |
| Width | 28" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers a material thickness of 0.077 inches (1.95 mm), a length of 46 inches (1168 mm), and a width of 28 inches (711 mm). Composed of Austenitic Grade 304 stainless steel, it exhibits excellent formability, weldability, and superior resistance to a broad range of corrosive media, including atmospheric conditions and many organic and inorganic chemicals. Its non-magnetic nature and polished surface finish make it an ideal substrate for high-performance abrading and polishing operations, ensuring consistent results and extended tool life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the sheet for the intended operation, securing it firmly if required by the process. 3. Proceed with abrading or polishing according to specific project requirements and material handling best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for corrosive environments. | Always select 304 stainless steel for applications involving exposure to moisture or chemicals to prevent premature degradation. |
| Improper handling leading to surface scratches. | Utilize protective films or careful handling techniques during transport and installation to maintain the pristine surface finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Surface preparation for plating or coating, Component finishing in manufacturing, Custom fabrication for industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||