This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it an ideal substrate for demanding electrical and lighting applications. Its precise dimensions ensure seamless integration into custom projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.072" |
| Length | 33" |
| Width | 13" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.072 inches in thickness, 33 inches in length, and 13 inches in width. The austenitic 304 stainless steel alloy provides excellent corrosion resistance against a wide range of environmental and chemical exposures, crucial for electrical enclosures and lighting fixtures operating in harsh conditions. Its high tensile strength and formability allow for precise fabrication of panels, chassis, and protective housings. This material meets ASTM A240 specifications for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general-purpose applications, ensuring reliability and longevity in its intended use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Determine the required dimensions for your application and mark the sheet for cutting. 2. Utilize appropriate cutting tools designed for stainless steel to achieve clean, precise edges. 3. Fabricate and assemble the cut pieces according to your design specifications, ensuring proper fastening and grounding where applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools that can cause galling or contamination. | Employ specialized stainless steel cutting tools and lubricants to prevent damage and maintain material integrity. |
| Insufficient grounding in electrical enclosures, leading to safety hazards. | Ensure all fabricated components are properly bonded and grounded according to electrical codes and safety standards. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Custom Lighting Fixture Components, Control Panel Substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||