This 304 stainless steel stock sheet offers superior corrosion resistance and formability. Precisely manufactured to industry standards, it's a versatile material for demanding fabrication and repair projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.070" |
| Length | 27" |
| Width | 47" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.070 inches in thickness, 27 inches in width, and 47 inches in length. The inherent properties of 304 stainless steel, including its austenitic microstructure, provide excellent resistance to a wide range of corrosive media, making it suitable for food processing equipment, chemical tanks, and general fabrication where hygiene and durability are paramount. Its workability allows for easy cutting, bending, and welding, facilitating custom part creation and structural reinforcement.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any oils or contaminants. 2. Measure and mark cut lines accurately according to design specifications. 3. Carefully cut the sheet using appropriate metalworking tools (e.g., shears, plasma cutter). 4. Prepare edges for joining if required (e.g., beveling for welding).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause excessive heat and material deformation. | Employ sharp cutting blades and cooling methods to minimize heat buildup and maintain material integrity. |
| Failing to account for material springback during bending operations. | Perform test bends to determine springback characteristics and adjust tooling or bend angles accordingly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Fabrication, Food & Beverage Equipment Components, Chemical Processing Tanks & Linings, General Industrial Repair.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||