This 304 stainless steel stock sheet is optimized for demanding abrading and polishing tasks. Its precise dimensions and superior material composition ensure consistent results and longevity in abrasive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 31" |
| Width | 36" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a precise 0.054" thickness, 31" length, and 36" width. Constructed from Austenitic 304 stainless steel, it offers excellent corrosion resistance, formability, and weldability, making it ideal for precision surface preparation. Its ductility and non-magnetic properties further enhance its suitability for applications requiring a smooth, defect-free finish. This sheet is engineered to withstand moderate abrasion and polishing pressures, maintaining its structural integrity and surface quality.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by cleaning thoroughly to remove any contaminants. 2. Position the 304 stainless steel sheet precisely according to design requirements. 3. Secure the sheet using appropriate fastening methods such as welding, riveting, or adhesive bonding, ensuring full contact for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient cleaning agents, leading to surface contamination. | Employ industrial-grade degreasers and isopropyl alcohol for thorough surface preparation before installation. |
| Inadequate fastening, causing sheet movement and uneven wear. | Utilize recommended fastener types and spacing based on the anticipated load and vibration conditions. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision polishing of metal components, Surface preparation for coatings and plating, Fabrication of custom abrasive tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||