This 304 stainless steel sheet is engineered for demanding lubricating applications, offering exceptional corrosion resistance and a smooth, low-friction surface critical for operational efficiency.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.022" |
| Length | 19" |
| Width | 25" |
A high-performance industrial component, this 0.022-inch thick sheet of 304 stainless steel measures 19 inches in width and 25 inches in length. Manufactured to stringent industrial standards, its inherent chromium-nickel alloy composition provides superior resistance to oxidation and a wide range of corrosive media, making it ideal for environments where lubrication and material integrity are paramount. The material's formability and weldability further enhance its utility in custom fabricated components for various mechanical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the 304 stainless steel sheet thoroughly to remove any contaminants. 2. Ensure the mating surfaces are properly prepared and free of debris. 3. Install the sheet according to the specific design requirements of the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel for corrosive environments. | Always select 304 stainless steel or higher for optimal corrosion resistance in industrial lubricating applications. |
| Failing to deburr edges after cutting. | Thoroughly deburr all cut edges to prevent premature wear on adjacent components and ensure safe handling. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing races and cages, Guide rails for conveyor systems, Wear strips in automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||