This 304 stainless steel stock sheet offers exceptional corrosion resistance and formability, crucial for demanding fabrication projects. Precisely sized for efficient material utilization.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.011" |
| Length | 40" |
| Width | 29" |
Built to exacting engineering tolerances, this 304 stainless steel sheet boasts a nominal thickness of 0.011 inches, a length of 40 inches, and a width of 29 inches. Composed of a chromium-nickel alloy, it exhibits excellent resistance to oxidation and a wide range of corrosive environments, making it suitable for applications in the food and beverage industry, chemical processing, and general fabrication where hygiene and durability are paramount. Its workability allows for bending, cutting, and welding with standard equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser, waterjet) for precise dimensional accuracy.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to edge deformation or burrs. | Employ sharp, high-quality cutting tools specifically designed for thin gauge stainless steel to maintain clean edges. |
| Insufficient material handling precautions, resulting in scratches or dents. | Handle the sheet with clean, non-abrasive gloves and store it on a flat, protected surface to prevent surface damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom enclosures and housings, Food processing equipment components, Architectural detailing and trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||