This 304 stainless steel seamless pipe, Schedule 40, offers superior corrosion resistance and mechanical strength. Engineered for reliable performance in challenging industrial applications, it ensures integrity for fluid conveyance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.2" |
| Outside Diameter | 2.516" |
| Wall Thickness | 0.176" |
Designed for demanding industrial environments, this 304 stainless steel seamless pipe conforms to Schedule 40 dimensions, featuring a nominal pipe size (NPS) of 5.2 inches, an actual outside diameter (OD) of 2.516 inches, and a wall thickness (WT) of 0.176 inches. Its 304 stainless steel composition provides excellent resistance to a broad range of corrosive media, including many acids and chlorides, making it suitable for high-pressure applications in chemical processing, food and beverage, and oil and gas industries where structural integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Inspect for any damage or deformities. 3. Install using appropriate welding or coupling methods according to industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of pipe ends before welding. | Thoroughly clean pipe ends with a degreaser and wire brush to ensure a clean surface for optimal weld penetration and integrity. |
| Using incompatible coupling methods for high-pressure applications. | Select coupling or welding procedures specifically rated for the pressure and material of the pipe, adhering to ASME B31.3 or equivalent standards. |
A: This Seamless Pipe, Schedule 40 is manufactured from 304 Stainless Steel.
A: Chemical processing fluid transport, Food and beverage sanitary piping, High-pressure hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||