This 3.6-inch Schedule 40 seamless pipe, crafted from premium 304 stainless steel, offers exceptional structural integrity and corrosion resistance for critical fluid and gas transport.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 3.6" |
| Outside Diameter | 5.251" |
| Wall Thickness | 0.264" |
Precision-manufactured to tight tolerances, this 3.6" Schedule 40 seamless pipe boasts a nominal size of 3.6 inches, an exact outside diameter of 5.251 inches, and a robust wall thickness of 0.264 inches. Fabricated from high-grade 304 stainless steel, it delivers superior tensile strength and yield strength, with excellent resistance to a wide range of corrosive media, including acids, alkalis, and chlorides. This material composition ensures longevity and reliability in demanding environments. The seamless construction eliminates weld defects, providing a uniform, leak-proof conduit ideal for high-pressure and high-temperature applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the pipe ends and the fitting surfaces to remove any debris or contaminants. 2. Apply an appropriate thread sealant or PTFE tape to the male threads of the fitting, ensuring even coverage. 3. Thread the fitting onto the pipe by hand until snug, then tighten with a pipe wrench an additional 1 to 1.5 turns, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for the fluid or gas being transported. | Always consult chemical compatibility charts for the thread sealant and the media to ensure proper sealing and prevent degradation. |
| Over-tightening the connection, leading to thread damage or pipe deformation. | Tighten connections to the recommended torque specification or until snug plus the specified number of turns. Use a torque wrench for critical applications. |
A: This Seamless Pipe, Schedule 40 is manufactured from 304 Stainless Steel.
A: Chemical processing and handling, Petrochemical industries, Food and beverage processing, Water and wastewater treatment, High-purity fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||