Engineered for extreme pressure and corrosive environments, this 304 Stainless Steel Seamless Pipe offers superior integrity. Schedule 160 designation ensures robust performance in critical fluid handling systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 2.292" |
| Wall Thickness | 0.483" |
Trusted by engineers across multiple sectors, this 304 Stainless Steel seamless pipe is manufactured to exacting standards for high-pressure applications. Featuring a nominal pipe size of 4.2", an outside diameter of 2.292", and a substantial wall thickness of 0.483", it meets Schedule 160 requirements. The inherent corrosion resistance and strength of 304 stainless steel make it ideal for chemical processing, oil and gas, and high-purity systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper alignment and support of the pipe run. 2. Utilize compatible welding procedures and filler materials for 304 stainless steel. 3. Perform thorough post-weld cleaning and inspection to verify joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for 304 stainless steel. | Always use welding consumables specifically rated for 304 stainless steel to maintain corrosion resistance and mechanical properties. |
| Inadequate pipe support leading to stress concentration. | Install sufficient pipe supports at appropriate intervals to manage thermal expansion and operational loads, preventing undue stress on the pipe and joints. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure fluid transfer systems, Chemical processing and handling, Oil and gas industry infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||