Engineered for critical service, this 3.2" NPS Schedule 160 seamless pipe in 304 stainless steel offers superior strength and corrosion resistance for high-pressure fluid and gas transport.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 3.2" |
| Outside Diameter | 5.253" |
| Wall Thickness | 0.281" |
Designed for demanding industrial environments, this 3.2" Nominal Pipe Size (NPS) seamless pipe features a 5.253" outside diameter (OD) and a robust 0.281" wall thickness, corresponding to Schedule 160. Fabricated from premium 304 stainless steel, it exhibits excellent tensile strength, ductility, and superior resistance to a wide range of corrosive media, making it ideal for high-pressure chemical processing, oil and gas extraction, and pharmaceutical manufacturing where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean pipe ends and mating surfaces to remove any contaminants. 2. Prepare for joining using appropriate welding procedures for 304 stainless steel, ensuring proper shielding gas and filler material. 3. Conduct hydrostatic or pneumatic testing to verify system integrity before operational use.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for 304 stainless steel. | Always utilize welding rods and filler wires specifically designed for 304 stainless steel to ensure weld integrity and corrosion resistance. |
| Failure to perform proper post-weld cleaning. | Remove all welding flux, slag, and heat tint after welding to prevent crevice corrosion and maintain the material's protective oxide layer. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure chemical processing, Petroleum and gas industry pipelines, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||