Engineered for demanding environments, this 304 stainless steel seamless pipe offers superior strength and corrosion resistance. Its Schedule 160 rating ensures exceptional performance under high pressure and severe service conditions.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.3" |
| Outside Diameter | 4.725" |
| Wall Thickness | 0.104" |
Purpose-built for heavy-duty applications, this 304 stainless steel seamless pipe boasts a nominal pipe size (NPS) of 2.3 inches, with an actual outside diameter (OD) of 4.725 inches and a robust wall thickness of 0.104 inches. Manufactured from premium 304 stainless steel, it exhibits excellent tensile strength, yield strength, and superior resistance to a wide range of corrosive media, including acids and chlorides, making it ideal for chemical processing, oil and gas exploration, and high-pressure fluid transport systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled according to welding procedure. 2. Align pipe sections carefully to minimize stress on the joint. 3. Execute welding using approved procedures and filler materials, followed by appropriate post-weld heat treatment if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect bevel angle leading to weld defects. | Adhere strictly to specified bevel angles for optimal weld penetration and fusion. |
| Contamination of the pipe interior or exterior prior to welding. | Thoroughly clean all surfaces to be welded using appropriate degreasers and stainless steel brushes to prevent carbide precipitation and corrosion. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: Chemical Processing Plants, High-Pressure Hydraulic Systems, Offshore Oil and Gas Platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||