This 304 stainless steel seamless pipe, Schedule 160, offers exceptional strength and corrosion resistance. With a 5.7" nominal size and precise 5.127" OD and 0.344" wall thickness, it is engineered for high-pressure, critical service environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.7" |
| Outside Diameter | 5.127" |
| Wall Thickness | 0.344" |
Built to exacting engineering tolerances, this 304 stainless steel seamless pipe boasts a 5.7-inch nominal size, an outside diameter of 5.127 inches, and a substantial wall thickness of 0.344 inches, conforming to Schedule 160. Manufactured from austenitic 304 stainless steel, it provides excellent corrosion resistance, particularly against a wide range of aggressive media, and exhibits superior mechanical strength and durability under high pressures and temperatures. Its seamless construction eliminates weld seams, ensuring uniform wall thickness and preventing potential leak paths, making it ideal for demanding applications in chemical processing, oil and gas, and high-purity fluid transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support spacing to prevent excessive stress. 2. Clean pipe ends thoroughly to remove any contaminants before joining. 3. Utilize appropriate welding procedures and filler materials for 304 stainless steel, adhering to relevant industry codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for 304 stainless steel. | Always use filler metals specifically recommended for 304 stainless steel to maintain corrosion resistance and mechanical properties. |
| Inadequate pipe support leading to sagging or stress concentrations. | Consult piping design standards for appropriate support intervals based on pipe size, material, and operating conditions. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure chemical processing equipment, Oil and gas pipelines and refining, Cryogenic and high-temperature fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||