This 304 stainless steel stock sheet is engineered for robust pneumatic applications. Its superior corrosion resistance and mechanical strength ensure reliable performance in challenging industrial environments, offering a durable foundation for custom components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.115" |
| Length | 44" |
| Width | 23" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.115 inches in thickness, 44 inches in length, and 23 inches in width. Fabricated from AISI 304 stainless steel, it provides excellent resistance to a wide range of corrosive media, making it ideal for applications exposed to moisture, chemicals, and atmospheric contaminants. The material's inherent strength and ductility allow for precise fabrication and forming, essential for creating custom pneumatic manifold blocks, enclosures, and structural components. Its non-magnetic properties and smooth surface finish further enhance its suitability for sanitary or food-grade pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free of debris. 2. Accurately measure and mark dimensions for cutting or forming. 3. Fabricate components using appropriate cutting, bending, and fastening methods, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify 304 or 316 stainless steel for pneumatic components exposed to moisture or chemicals to prevent premature corrosion and failure. |
| Ignoring material compatibility with pneumatic media. | Verify that the 304 stainless steel is compatible with the specific gases or fluids used in your pneumatic system, especially in high-purity or specialized applications. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifold Fabrication, Pneumatic System Enclosures, Structural Supports for Pneumatic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||