This robust 304 stainless steel industrial O-ring provides superior sealing performance. Engineered for demanding applications, it offers exceptional durability and resistance to corrosion and extreme temperatures.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.339" |
| Outside Diameter | 4.677" |
| Cross Section | 0.241" |
A high-performance industrial component, this O-ring boasts a precise inside diameter of 1.339 inches, an outside diameter of 4.677 inches, and a cross-section of 0.241 inches. Constructed from premium 304 stainless steel, it exhibits excellent tensile strength, resistance to chemical degradation, and a wide operating temperature range, making it ideal for high-pressure systems and corrosive environments. Its inherent material properties ensure longevity and a reliable seal under strenuous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the mating grooves and sealing surfaces for any debris or damage. 2. Carefully place the O-ring into its designated groove, ensuring it is not twisted or overstretched. 3. Assemble the components, applying even pressure to compress the O-ring to achieve a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Tighten fasteners to manufacturer-recommended torque specifications to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the O-ring material. | Consult the O-ring material compatibility chart and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Hydraulic and pneumatic systems, Chemical processing equipment, High-temperature fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||