This robust industrial O-ring, constructed from premium 304 stainless steel, offers exceptional durability and chemical resistance. Engineered for demanding sealing applications where standard elastomers fail.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.226" |
| Outside Diameter | 3.274" |
| Cross Section | 0.201" |
Engineered for reliability and performance, this 304 stainless steel industrial O-ring provides a superior sealing solution in high-temperature, corrosive, and high-pressure environments. Its precisely machined dimensions, featuring an inside diameter of 1.226 inches, an outside diameter of 3.274 inches, and a cross-section of 0.201 inches, ensure a tight and leak-proof seal. The 304 stainless steel material offers excellent resistance to a broad spectrum of chemicals, acids, and solvents, making it ideal for food processing, pharmaceutical, and chemical industries. This design mitigates compression set and maintains sealing integrity under strenuous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Position the O-ring within its designated groove, ensuring it is seated uniformly without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the O-ring or groove. | Apply gentle, even pressure to seat the O-ring. Utilize appropriate installation tools if necessary to avoid direct contact with sharp edges. |
| Incorrect O-ring size selection for the groove dimensions, leading to leaks or premature failure. | Always verify O-ring dimensions (ID, OD, CS) against the groove specifications to ensure a proper fit and compression ratio. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid systems, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||