This robust 304 stainless steel industrial O-ring provides superior sealing integrity in high-pressure and corrosive applications. Engineered for exceptional durability and chemical resistance.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.822" |
| Outside Diameter | 3.026" |
| Cross Section | 0.106" |
Designed for demanding industrial environments, this O-ring features an inside diameter of 0.822 inches, an outside diameter of 3.026 inches, and a precise 0.106-inch cross-section. Constructed from high-grade 304 stainless steel, it offers exceptional resistance to corrosion, high temperatures, and a wide range of chemicals, making it ideal for use in food processing, chemical manufacturing, and pharmaceutical industries where hygiene and material inertness are critical. Its robust construction ensures long-term performance and reliable sealing under extreme operational pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into the designated groove, avoiding any twisting or stretching. 3. Apply a light lubricant compatible with the application if necessary for easier assembly and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure. | Tighten fasteners to the manufacturer's recommended torque specifications to ensure proper compression without overstressing the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the O-ring material. | Always verify that any lubricant or cleaning agent is chemically compatible with 304 stainless steel and the specific operating environment. |
| Installing the O-ring with a twist, which can lead to leaks and reduced lifespan. | Ensure the O-ring is seated squarely in its groove and that no twisting occurs during installation. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage machinery, Pharmaceutical manufacturing, High-pressure hydraulic systems, Corrosive fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||