This high-grade 304 stainless steel industrial O-ring provides exceptional sealing integrity. Designed for extreme temperatures and corrosive media, it ensures a robust and leak-free solution for critical industrial applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.969" |
| Outside Diameter | 9.185" |
| Cross Section | 0.093" |
Manufactured under strict quality controls, this industrial O-ring boasts superior chemical resistance and thermal stability owing to its 304 stainless steel construction. The precise dimensions of 9.969" inside diameter, 9.185" outside diameter, and a 0.093" cross-section ensure a precise fit and effective sealing in a wide range of fluid and gas handling systems. Its robust material composition makes it ideal for applications involving aggressive chemicals, high pressures, and elevated temperatures where standard elastomers would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its groove, avoiding stretching or twisting. 3. Assemble mating components, ensuring even pressure distribution for proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Gently place the O-ring into the groove, using a lubricant if necessary, and avoid excessive pulling or deformation. |
| Using an O-ring that is not compatible with the fluid or operating temperature. | Verify the material's chemical and temperature resistance data against the specific application requirements before selection. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Corrosive Environment Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||