This industrial O-ring, constructed from robust 304 stainless steel, offers superior sealing in demanding environments. Its precise dimensions ensure a reliable, long-lasting seal against pressure and contaminants.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.961" |
| Outside Diameter | 8.573" |
| Cross Section | 0.163" |
Manufactured under strict quality controls, this industrial O-ring is precisely engineered for critical sealing applications. The 304 stainless steel construction provides exceptional corrosion resistance, chemical inertness, and thermal stability, making it suitable for a wide range of industrial fluids and temperatures. With an inside diameter of 2.961 inches, an outside diameter of 8.573 inches, and a cross-section of 0.163 inches, it meets stringent dimensional tolerances for optimal performance in pumps, valves, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully place the O-ring into its designated groove, avoiding any stretching or twisting. 3. Assemble the component, applying even pressure to seat the O-ring properly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Tighten fasteners to the manufacturer's specified torque values. |
| Using incompatible lubricants, which can degrade the O-ring material. | Consult material compatibility charts and use only approved lubricants for silicone O-rings. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Machinery, Pharmaceutical Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||