This industrial O-ring, constructed from robust 304 stainless steel, offers exceptional sealing capabilities in extreme environments. Its precise dimensions ensure reliable performance in critical industrial applications, providing a secure barrier against leaks.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 4.454" |
| Outside Diameter | 3.962" |
| Cross Section | 0.086" |
Manufactured under strict quality controls, this industrial O-ring is engineered from high-grade 304 stainless steel, renowned for its corrosion resistance and durability in harsh industrial settings. With an Inside Diameter of 4.454 inches, an Outside Diameter of 3.962 inches, and a precise Cross Section of 0.086 inches, it guarantees an optimal fit and superior sealing integrity. This material composition makes it suitable for applications involving high temperatures, aggressive chemicals, and significant pressure fluctuations, ensuring long-term operational reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the O-ring within its designated groove, ensuring it is seated evenly without twisting. 3. Apply slight, uniform pressure to install the mating component, verifying a consistent seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Adhere to recommended torque specifications for all fasteners to prevent premature seal failure. |
| Using the wrong size O-ring, leading to improper sealing. | Always verify O-ring dimensions (ID, OD, Cross Section) against the groove specifications before installation. |
| Installing a twisted or kinked O-ring. | Ensure the O-ring lies flat and is not twisted in the groove before assembling mating components. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, High-Temperature Valve Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||