Engineered for robust sealing, this 304 stainless steel industrial O-ring offers superior resistance to extreme temperatures and corrosive environments. Its precise dimensions ensure a reliable, long-lasting seal in critical applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.324" |
| Outside Diameter | 0.771" |
| Cross Section | 0.179" |
A proven choice for industrial professionals, this O-ring boasts an Inside Diameter of 1.324", an Outside Diameter of 0.771", and a Cross Section of 0.179". Constructed from high-grade 304 stainless steel, it provides exceptional corrosion resistance, high tensile strength, and thermal stability, making it ideal for use in aggressive chemical processing, food and beverage manufacturing, and high-temperature fluid handling systems where standard elastomeric seals would degrade or fail. Its metallic construction ensures a dependable seal under significant pressure and vibration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating groove and sealing surfaces to remove any debris or residual lubricants. 2. Carefully inspect the O-ring for any damage or imperfections before installation. 3. Gently place the O-ring into the designated groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners which can deform the O-ring and compromise the seal. | Tighten fasteners to the manufacturer's specified torque values. Use a torque wrench for accuracy. |
| Using the wrong size O-ring for the groove, leading to leakage or premature failure. | Verify the O-ring's dimensions (ID, OD, CS) against the groove specifications and mating part dimensions before installation. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: High-temperature fluid systems, Corrosive chemical processing, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||