This industrial O-ring features a robust Buna-N elastomer sealed within a 304 stainless steel housing, offering superior chemical resistance and durability for critical sealing applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.597" |
| Outside Diameter | 5.842" |
| Cross Section | 0.143" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an inside diameter of 7.597 inches, an outside diameter of 5.842 inches, and a cross-section of 0.143 inches. The Buna-N (Nitrile Butadiene Rubber) compound provides excellent resistance to oils, fuels, and hydraulic fluids, making it suitable for a wide range of operating temperatures. The 304 stainless steel construction imparts exceptional corrosion resistance and mechanical strength, ensuring long-term performance in harsh industrial settings, including chemical processing, automotive, and general machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, consistent pressure and utilize appropriate installation tools if necessary. |
| Installing in a contaminated groove. | Thoroughly clean the groove and mating surfaces before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||