This industrial O-ring, crafted from high-grade 304 stainless steel, offers exceptional durability and corrosion resistance for critical sealing needs in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.175" |
| Outside Diameter | 4.796" |
| Cross Section | 0.148" |
Built to exacting engineering tolerances, this industrial O-ring features a precise Inside Diameter (ID) of 9.175 inches, an Outside Diameter (OD) of 4.796 inches, and a Cross Section (CS) of 0.148 inches. The 304 stainless steel construction provides superior resistance to a wide range of chemicals, high temperatures, and extreme pressures, making it ideal for static and dynamic sealing applications where material integrity is paramount. This specification ensures a reliable seal, preventing leakage and contamination in critical industrial processes. Its robust nature guarantees longevity and performance even under strenuous operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both sealing surfaces and the O-ring thoroughly to remove any contaminants. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant to prevent damage during installation. 3. Gently install the O-ring into its designated groove, ensuring it is seated correctly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Employ a gentle, deliberate motion. Utilize appropriate installation tools if necessary to avoid direct contact with sharp edges. |
| Installing a dry O-ring, causing friction and potential damage. | Always apply a thin, even layer of a compatible lubricant to the O-ring and sealing surface before installation. |
| Using incorrect O-ring size for the groove, resulting in extrusion or leakage. | Verify the O-ring dimensions (ID, OD, CS) match the groove specifications precisely before installation. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Corrosive Environment Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||