This robust 304 stainless steel stock sheet, precision-cut to 0.881" thickness, 16" width, and 29" length, is engineered for demanding filtration and structural support.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.881" |
| Length | 16" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.881" thick sheet of 304 stainless steel offers exceptional corrosion resistance and mechanical strength, making it ideal for high-pressure and chemically aggressive filtration systems. Its Austenitic structure ensures weldability and formability, while the inherent passivation layer provides enduring protection against oxidation and pitting. The substantial 16" x 29" dimensions allow for versatile fabrication into robust filter housings, support structures, or custom sieve plates within demanding industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Fabricate or weld the sheet into the desired filtration apparatus, following established best practices for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use 304 or 316 stainless steel fasteners when connecting to this sheet. |
| Inadequate cleaning post-fabrication, leaving behind abrasive particles. | Thoroughly clean the assembled unit with a mild detergent and water, followed by a passivation treatment if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial liquid and gas filtration systems, Custom sieve plates and screens, Structural support in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||