This 304 stainless steel stock sheet is precision-engineered for robust filtering solutions. Its substantial 0.283" thickness, 43" length, and 38" width provide a durable and corrosion-resistant surface ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.283" |
| Length | 43" |
| Width | 38" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers superior performance in critical filtering processes. The material's inherent strength and corrosion resistance, owing to its chromium and nickel content, ensure longevity and integrity under harsh operating conditions. With a precise thickness of 0.283 inches, a generous length of 43 inches, and a width of 38 inches, this sheet is designed to meet stringent dimensional requirements for custom filter fabrication, structural support in filtration systems, and specialized separation media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Accurately measure and mark cut lines according to design specifications. 3. Employ appropriate cutting tools and safety equipment for precise fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to dimensionally incorrect filter components. | Utilize calibrated cutting machinery and verify measurements before and during the cutting process. |
| Using abrasive cleaning agents that can compromise the stainless steel's passivation layer. | Clean with non-abrasive detergents and water, followed by a thorough rinse and dry. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom industrial filter media fabrication, Support structures for filtration systems, Screening and separation equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||