Engineered for superior performance and longevity, this 304 stainless steel deep groove ball bearing ensures smooth, low-friction operation in critical power transmission systems. Its robust construction withstands corrosive environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 32mm |
| Width | 22mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a precise 97mm inside diameter, a 32mm outside diameter, and a 22mm width, ensuring optimal fit and function within its intended housing. Constructed from premium 304 stainless steel, it offers exceptional corrosion resistance, vital for applications exposed to moisture, chemicals, or harsh atmospheric conditions. This material also provides good mechanical strength and wear resistance. The deep groove raceway design allows for high rotational speeds and accommodates moderate axial loads in both directions, making it suitable for a wide range of demanding industrial machinery and equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. Verify dimensions match the specified tolerances. 2. Carefully press the bearing onto the shaft using an appropriate bearing press or induction heater, applying force evenly to the inner ring only. 3. Alternatively, if pressing into the housing, apply force evenly to the outer ring. Ensure the bearing is seated fully and squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on a shaft. | Always apply mounting force to the inner ring when installing on a shaft to prevent damage to the raceways and balls. |
| Overtightening the shaft nut or housing retention. | Ensure proper preload is set according to manufacturer specifications. Excessive preload can lead to premature bearing failure. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps and Compressors, Conveyor Systems, Food Processing Machinery, Marine Equipment, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||