This 304 Stainless Steel Deep Groove Ball Bearing offers superior corrosion resistance and durability. Designed for smooth, low-friction operation in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 80mm |
| Width | 21mm |
Engineered for reliability and performance, this 304 stainless steel deep groove ball bearing features an inside diameter of 95mm, an outside diameter of 80mm, and a width of 21mm. The 304 stainless steel construction provides excellent resistance to rust and corrosion, making it ideal for applications exposed to moisture, chemicals, or saltwater. Its robust design ensures consistent load-bearing capacity and extended service life in moderate speed and load conditions. This bearing is suitable for general industrial machinery, food processing equipment, marine applications, and any environment where standard steel bearings would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring even pressure. 3. Install the bearing into the housing, verifying a snug fit without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or distortion. | Use a proper bearing installation tool or press, applying force only to the ring being fitted. |
| Inadequate lubrication, causing premature wear and increased friction. | Apply the recommended type and amount of lubricant (grease or oil) specified for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food & Beverage Processing Equipment, Marine Hardware & Equipment, Chemical Handling Systems, Medical Devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||