Engineered for robust performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and reliable load handling in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 56mm |
| Width | 25mm |
A proven choice for industrial professionals, this 304 stainless steel deep groove ball bearing (94mm ID x 56mm OD x 25mm W) delivers superior performance and longevity. The 304 stainless steel construction provides excellent resistance to corrosion, making it ideal for applications involving moisture, chemicals, or harsh operational conditions. Its precise dimensions ensure smooth, low-friction operation, minimizing energy loss and extending equipment lifespan. This bearing is designed to handle moderate radial and axial loads, making it suitable for a wide range of power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly to remove any debris or contaminants. 2. Carefully apply a light film of appropriate lubricant to the bearing's inner ring and the shaft. 3. Gently press the bearing onto the shaft, ensuring it is seated squarely. If interference fitting is required, use a controlled heating or pressing method.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a controlled press fit or induction heater for installation. Avoid hammering the bearing directly. |
| Improper lubrication, either insufficient or incorrect lubricant type, leading to premature wear. | Refer to manufacturer's lubrication guidelines for the specific application and operating environment. Ensure proper sealing to retain lubricant. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Conveyor Systems, Electric Motors and Pumps, Gearboxes and Reducers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||