Engineered for superior performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and robust load-bearing capabilities. Its precision design ensures smooth operation in challenging environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 189mm |
| Width | 12mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 94mm, an outside diameter of 189mm, and a width of 12mm. Constructed from high-grade 304 stainless steel, it exhibits excellent resistance to rust, corrosion, and mild acids, making it ideal for food processing, chemical handling, and marine applications. The bearing geometry is optimized for high radial and axial loads, ensuring reliability and extended service life in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and shaft thoroughly before installation. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and shaft. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or raceway damage. | Employ a controlled press fit or induction heater for proper bearing mounting. |
| Contaminating the bearing during handling or installation. | Handle bearings in a clean environment and keep them in their original packaging until ready for use. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Machinery, Chemical Processing Equipment, Marine and Offshore Equipment, Pharmaceutical Production Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||