This 304 stainless steel deep groove ball bearing delivers exceptional performance and corrosion resistance. Engineered for smooth, low-friction operation in demanding power transmission applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 92mm |
| Outside Diameter | 60mm |
| Width | 12mm |
Specified by design engineers worldwide, this 304 stainless steel deep groove ball bearing (92mm ID x 60mm OD x 12mm W) offers superior corrosion resistance, making it ideal for wet, humid, or chemically aggressive environments. The 304 stainless steel construction provides excellent durability and resistance to rust and staining, ensuring extended service life. Its precision-ground raceways and optimized internal geometry minimize friction and vibration, contributing to efficient power transmission and reduced energy loss in a wide range of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and shaft surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. If pressing into a housing, apply even force to the outer ring, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring when mounting on a shaft. | Always apply mounting force to the ring being pressed onto its mating part (inner ring for shaft, outer ring for housing). |
| Contaminating the bearing during installation. | Handle bearings in a clean environment and keep them in their original packaging until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Pumps and fluid handling systems, Food processing machinery, Marine equipment, Pharmaceutical manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||