Engineered for robust performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance. Its precise dimensions ensure reliable power transmission in diverse industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 91mm |
| Outside Diameter | 49mm |
| Width | 10mm |
A high-performance industrial component, this deep groove ball bearing is meticulously crafted from premium 304 stainless steel, providing superior resistance to rust and chemical degradation, making it ideal for corrosive or washdown applications. The bearing features an inside diameter of 91mm, an outside diameter of 49mm, and a width of 10mm, ensuring a precise fit within power transmission systems. Its hardened steel raceways and balls are designed for smooth, low-friction rotation under moderate radial and axial loads. The inherent properties of 304 stainless steel contribute to extended service life and reduced maintenance requirements in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing bore and shaft thoroughly to remove any debris or lubricant. 2. Gently warm the bearing or cool the shaft to facilitate installation, avoiding excessive force. 3. Ensure the bearing is seated squarely and fully against the shaft shoulder or housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Utilize a proper bearing installer or induction heater for safe and controlled installation. |
| Contaminating the bearing during installation or operation. | Maintain a clean environment and ensure proper sealing to prevent ingress of dirt and moisture. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Pumps and Compressors, Conveyor Systems, Food and Beverage Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||