Engineered for superior performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and load-bearing capabilities. Its robust construction ensures reliable operation in challenging environments, making it a vital component for power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 87mm |
| Outside Diameter | 35mm |
| Width | 25mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 87mm, an outside diameter of 35mm, and a width of 25mm. Constructed from premium 304 stainless steel, it exhibits excellent resistance to rust and corrosion, making it suitable for applications exposed to moisture, chemicals, or harsh atmospheric conditions. The material's inherent strength and durability allow for sustained high radial and axial load capacities, ensuring smooth and efficient rotational performance under demanding operational stresses. Its compact design facilitates integration into a wide array of power transmission assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. Ensure both mating surfaces are free of burrs or imperfections. 2. Carefully install the bearing onto the shaft, applying even pressure. Avoid hammering directly on the bearing's inner or outer ring to prevent damage. 3. Once the bearing is seated on the shaft, position it within the housing, again ensuring even pressure and proper alignment to avoid binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication during installation. | Ensure the bearing is adequately lubricated with the specified lubricant before and during installation to facilitate smooth operation and prevent premature wear. |
| Applying excessive force or impact during mounting. | Use appropriate press-fitting or induction heating methods for installation. Never strike the bearing directly with a hammer, as this can cause brinelling and compromise its integrity. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial machinery with exposure to corrosive environments, Food processing equipment requiring hygienic and rust-free components, Marine applications and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||