Engineered for reliability, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance. Its robust construction ensures smooth, low-friction operation under demanding power transmission loads.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 30mm |
| Width | 15mm |
A proven choice for industrial professionals, this deep groove ball bearing is meticulously crafted from premium 304 stainless steel, ensuring exceptional resistance to corrosion, oxidation, and chemical attack. With an inside diameter of 83mm, an outside diameter of 30mm, and a width of 15mm, it provides precise radial and axial load support. This bearing's material composition makes it ideal for environments with high moisture, acidic, or alkaline conditions, ensuring prolonged operational life and reduced maintenance in critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on the shaft and housing are clean and free from burrs or debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing's inner ring and the shaft. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without tilting. Use a press or appropriate bearing fitting tool for even force distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or housing with excessive or uneven force. | Utilize a hydraulic press or a dedicated bearing installer tool to apply force evenly to the bearing's inner ring when mounting on a shaft, or to the outer ring when mounting in a housing. |
| Contaminating the bearing during handling and installation. | Keep the bearing in its original packaging until immediately before installation. Handle with clean, lint-free gloves and avoid exposure to dust, dirt, or corrosive substances. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Pumps and Compressors, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||