This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and smooth operation. Designed for reliable performance in demanding power transmission applications where hygiene and environmental resistance are critical.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 74mm |
| Width | 45mm |
Manufactured under strict quality controls, this deep groove ball bearing features a robust 304 stainless steel construction, ensuring exceptional resistance to rust and chemical corrosion. With an inside diameter of 82mm, an outside diameter of 74mm, and a width of 45mm, it provides precise load distribution and reduced friction. The inherent properties of 304 stainless steel make it ideal for food processing, marine environments, chemical handling, and outdoor equipment where standard bearings would degrade rapidly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into its housing, applying even pressure to the outer ring. 3. Verify shaft fitment by ensuring a snug, interference fit on the inner ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the inner or outer race during installation. | Apply force only to the ring being pressed into its mating component; use an appropriate press or bearing installer tool. |
| Misalignment during press-fitting, leading to premature wear and failure. | Ensure the bearing and housing are perfectly aligned before initiating the press operation. Use alignment tools if necessary. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine and Coastal Machinery, Chemical Handling Systems, Outdoor Industrial Equipment, Medical Devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||