Engineered for exceptional load-bearing capacity and smooth rotation, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and longevity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 80mm |
| Outside Diameter | 195mm |
| Width | 15mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an 80mm inner diameter, a 195mm outer diameter, and a 15mm width. Constructed from premium 304 stainless steel, it exhibits excellent resistance to rust and corrosion, making it ideal for wet, humid, or chemically aggressive operating conditions. The precision-ground raceways ensure reduced friction and noise, contributing to extended service life and optimal performance in applications requiring reliable rotational support under radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft using an appropriate bearing installer or press, ensuring even pressure is applied to the inner ring. 3. Mount the assembly into the housing, verifying proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft by striking the outer ring. | Always apply force to the inner ring when mounting onto the shaft to prevent brinelling of the raceways. |
| Using excessive force during installation, leading to deformation. | Utilize a bearing press or installer with the correct tooling to ensure even pressure distribution and prevent damage to the bearing. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine Environments, Chemical Processing Machinery, Medical Devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||