Engineered for superior performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance. Its precise dimensions ensure smooth operation and long service life in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 76mm |
| Outside Diameter | 194mm |
| Width | 11mm |
A proven choice for industrial professionals, this 304 stainless steel deep groove ball bearing (76mm ID x 194mm OD x 11mm Width) is designed for robust power transmission. The 304 stainless steel construction provides excellent resistance to corrosion, making it ideal for wet, humid, or chemically aggressive environments. Its high load-carrying capacity and low friction coefficient contribute to efficient operation in a wide range of machinery, including pumps, conveyors, and general industrial equipment. The tight manufacturing tolerances ensure predictable performance and extended operational life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean bearing bore and shaft to remove any debris or lubricant. 2. Gently heat the bearing or cool the shaft to facilitate assembly, avoiding direct impact. 3. Ensure the bearing is seated squarely and fully against its housing or shaft shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use a proper bearing press or induction heater/cooler for controlled installation, ensuring even pressure distribution. |
| Incorrect lubrication or contamination of the bearing during handling. | Use the specified lubricant type and quantity, and always handle bearings in a clean environment, keeping seals intact. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps and Compressors, Material Handling and Conveyor Systems, Food Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||